HelicopterDemoTest
hoping against hope...
Visibility
Primary Model File
Public Access
Publicly viewable models and content, no restrictions.
PuttyKnife
Putty Knife 00-221-1536 was scanned and then converted to STL for Seabee use.
Visibility
Primary Model File
Lightplate Switch Cover
Light Plate Switch Cover, scanned.
Model Metadata for LightplateSwitchCover.x3d
| attribute | value |
|---|---|
title |
LightplateSwitchCover.x3d |
description |
Light Plate Switch Cover |
created |
16 December 2018 |
generator |
Meshlab X3D Exported, |
Generator Wrench
Model Metadata for GeneratorWrench.x3d
| attribute | value |
|---|---|
title |
GeneratorWrench.x3d |
description |
Generator Wrench |
created |
16 December 2018 |
generator |
Meshlab X3D Exported, http://meshlab.sourceforge.net |
Flexible Cable Connector Cover
Model Metadata for FlexibleCableConnectorCover.x3d
| attribute | value |
|---|---|
title |
FlexibleCableConnectorCover.x3d |
description |
Flexible Cable Connector Cover protects an electrical cable end. |
created |
16 December 2018 |
generator |
M |
LPD 17
This is one of the models used in the following Techical Report.
Reference: Reese, Cody M., Remote Collaborative 3D Printing - Process Investigation,
Technical Report TR-NAVFAC-EXWC-EX-1601,
NAVFAC Engineering and Expeditionary Warfare Center (EXWC),
Port Hueneme California, April 2016.
LA Class Sub
This is one of the models used in the following Techical Report.
Reference: Reese, Cody M., Remote Collaborative 3D Printing - Process Investigation,
Technical Report TR-NAVFAC-EXWC-EX-1601,
NAVFAC Engineering and Expeditionary Warfare Center (EXWC),
Port Hueneme California, April 2016.
http://x3dgraphics.com/examples/X3dForAdvancedModeling/AdditiveManufacturing/TR-NAVFAC-EXWC-EX-1601-distribution-A.pdf
Bushing
This is one of the models used in the following Techical Report.
Reference: Reese, Cody M., Remote Collaborative 3D Printing - Process Investigation,
Technical Report TR-NAVFAC-EXWC-EX-1601,
NAVFAC Engineering and Expeditionary Warfare Center (EXWC),
Port Hueneme California, April 2016.
http://x3dgraphics.com/examples/X3dForAdvancedModeling/AdditiveManufacturing/TR-NAVFAC-EXWC-EX-1601-distribution-A.pdf
Metadata file for this model:
Whole Pier
This is one of the models used in the following Techical Report.
Reference: Reese, Cody M., Remote Collaborative 3D Printing - Process Investigation,
Technical Report TR-NAVFAC-EXWC-EX-1601,
NAVFAC Engineering and Expeditionary Warfare Center (EXWC),
Port Hueneme California, April 2016.
http://x3dgraphics.com/examples/X3dForAdvancedModeling/AdditiveManufacturing/TR-NAVFAC-EXWC-EX-1601-distribution-A.pdf
Wrench 81mm Mortar
Wrench for breech bolt on 81mm mortar. When Marines at SPMAGTF Central Command Crisis Response in Kuwait did not have the original wrench that came with the gun to remove the breach plug that sits at the breach end of the gun, they used a 3D printer to improvise adapt and overcome.
